Skip to main content

CBSE Physics Numerical based on chapter - Electricity & its effects For (Class X)


NUMERICAL - Electricity and its effects For (Class X)

1. A resistance of 6 ohms is connected in series with another resistance of 4 ohms. A potential difference of 20 volts is applied across the combination. Calculate the current through the circuit and potential difference across the 6 ohm  resistance.
2. Calculate the number of electrons constituting one coulomb of charge per second through any cross section of a conductor.
3. How much work is done in moving a charge of 2 C across two points having a potential difference of 12 V ?
4. How much energy is given to each coulomb of charge passing through a 6 V battery ?
5. Calculate the work done in moving a charge of 5 Coulombs from a point at a potential of 210 Volts to another point at 240 Volts.
7. When a particle of charge 10 �C is brought from infinity to a point P, 2.0 mJ work is done by the external forces. What is the potential at P ?
9. How many electrons pass through a lamp in one minute if the current be 200 mA?
10. Calculate the current supplied by a cell if the amount of charge passing through the cell in 4 seconds is 12 C ?
11. A 2 Volt cell is connected to a 1 O resistor. How many electrons come out of the negative terminal of the cell in 2 minutes?
12. a)  How much current will an electric bulb draw from a 220 V source, if the resistance of the bulb filament is 1200 O ?
b)  How much current will an electric heater coil draw from a 220 V source, if the resistance of the heater coil is 100 O ?
13. The potential difference between the terminals of an electric heater is 60 Volts when it draws a current of 4 Ampere from a source. What current will the heater draw if the potential difference is increased to 120 Volt.  
14. A torch bulb when cold has 1O resistance. It draws a current of 0.3 Ampere when glowing from a source of 3 V. Calculate the resistance of the bulb when glowing and explain the reason for the difference in resistance.   

Comments

Popular posts from this blog

10th Our Environment CBSE HOTS Questions

CBSE HIGHER ORDER THINKING SKILLS (HOTS) QUESTIONS 1) Write any two ways of energy flow through an ecosystem. 2) Differentiate between biodegradable and non biodegradable with respect to the effect of biological processes on them and the way they affect our environment. 3) Which level shows the maximum biological magnification? Why? 4) Why is a pond self sustaining unit while an aquarium may not be? Justify the answer. 5) Arrange grasshopper, frog, grass, eagle and snake in the form of food chain. 6) If 1000 KJ energy is available at producer level, how much energy will be available at first carnival level? 7) Why do most food chains have 3-5 steps only? 8) Select the biodegradable items from the list given below- Polythene bags, old clothes, wilted flowers, pencil shavings, glass bangles, bronze statue, vegetable peels. 9) What will be impact on ecosystem if bacteria and fungi are removed from the Environment? 10) Express your feelings on the picture given down below. What will happen...

BEEHIVE Chapter 1 - The Fun They Had

www.escholarindia.com 8802407393/9013927492

INDIA AND THE CONTEMPORARY WORLD-1 Chapter 1 - The French Revolution

Chapter Test Questions   Answers www.escholarindia.com 8802407393/9013927492